TSUNAMI pump is the ideal solution for filling and washing of the water-heating systems and is also used in solar thermal technology
What we like about this Flushing Pump:
- Available in three different flow rate / pressure:
Art. |
Flow Rate
|
Max Pressure |
Max Pump Head
|
Weight |
905153 |
60 L/min |
7 bar |
70 m |
25,00 Kg |
905151 |
70 L/min |
8 bar |
80 m |
30,00 Kg |
905154 |
95 L/min |
9 bar |
90 m |
30,00 Kg |
- With TSUNAMI is possible:
- Washing the circuits through the mix between the chemical and the mechanical action of the pump
- Filling circuits with mixed chemicals products or with water thanks to the graduated container
- Purge thanks to turbulent flow induced into the circuit
- Pressurize up to 9 bar depending on the model (In the 95/9 model - art. 905154)
- The turbulent flow of the flushing solution in the pipe exerts a mechanical action and accelerates the chemical reactions by mixing
- To reach the speed necessary to generate fluid turbulence is thus fundamental a high flow rate, for a small installation recommend at least 40L / min, preferable 60 L / min or more
- In case of bottlenecks generated by sludge to be flushed it is important to reverse the flow direction and especially higher pressure to contrast the pressure drop
- Practical, simple and reliable to use for filling and quick cleaning, even on large systems
- Easy to fill and to clean due to the large mouth of the reservoir opening of 210 mm
- Round section tank with reinforcements, will not strain when it is full of hot liquid
- born for the building site, the most imitated with pneumatic wheels
- The TSUNAMI pump is supplied equipped with 2 pipes 3m long, resistant to 10 bar and 80°C (H.T.), in accordance with ISO R1307, guarantee of quality
- Best working range on the market, excellent resistance to solutions with pH>6,5 and pH<9
Technical Features
- Tank Capacity 50 L
- Pipe Fittings 3/4”F
- Power Supply 230V - 50 Hz
- Pressure Level 70 dBA
- Protection Rating IP55