Drill Coring Machine with two-speed mechanical drive. Equipped with a 1.8kW high efficiency engine with soft start. It works at a frequency of 50-60hz and a percussion frequency 29000 / 56000 bpm.
What we like about this dry core drill
- Equipped with a 1.8 kW high efficiency motor with soft start
- The core drilling system is equipped with a tubular spirit level to aid in aligning when drilling horizontally. By positioning the machine so that the bubble is in the center of the window one can drill a straight hole
- This machine is for the intended purpose of diamond core drilling of concrete, masonry, stone and similar materials. It may also be mounted on a rig (drilling stand).
- Ideal for diamond drilling in concrete, masonry, stone and similar materials
- The Diamond 1800W dry core drill works at a frequency of 50-60Hz and a percussion frequency of 29000/56000 bpm
- Equipped with two-speed gearbox to adapt to the size of the crowns and the hardness of the workpiece
- Mechanical safety clutch, to protect the operator and the system from excessive torque
- Produced with electronic components used for soft starting, overload protection and thermal protection: if the condition of excessive load continues for a prolonged time or if the motor reaches too high a temperature, the motor stops completely
- Percussion function to keep diamond segments sharp, with command that can be deactivated
- The Diamond 1800W core drill is equipped with a lockable trigger
- Side handle for working in safety and comfort
- Gear selector for excellent use of the motor for dry drilling
- Detailed dry core drill operating and maintenance instructions, also available online
Technical Features
Power input |
|
1800W |
Voltage |
|
220-240V~ 50-60Hz |
No Load /Full Load min-1 |
Speed 1 |
1800 / 1080 |
|
Speed 2 |
3600 / 2160 |
Percussion Frequency |
Speed 1 |
29.000 bpm |
|
Speed 2 |
56.000 bpm |
Arbor Thread |
|
1-1/4-7 UNC male x 1/2" BSP female |
Capacity-Dry |
|
182 mm (7-1/4′) |
Dimensions |
|
505mm x 105mm x 210mm |
Neck diameter |
|
60 mm |
Net weight
|
|
4,9 Kg |
Wire length |
|
3 m |
Standard equipment
The Diamond 1800W dry drill coring machine is ready to work as soon as it is retracted! Comes with:
- Diamond drilling system
- M16M-1/2''M fitting
- Extension 200m M16M-1/2"M
- Dust suction connection
- Additional anti-vibration handle
- Plastic case
- Vacuum adapter