• On sale!
  • -38.25%
Corrosion Inhibitor for Heating and Cooling Circuits
search
  • Corrosion Inhibitor for Heating and Cooling Circuits
  • Corrosion Inhibitor for Heating and Cooling Circuits
  • Corrosion Inhibitor for Heating and Cooling Circuits

Corrosion Inhibitor for Heating and Cooling Circuits

€76.90
€47.49 Save 38.25%

(€47.49 articolo)

Corrosion inhibitor liquid for heating and cooling circuits, to be used in case of insufficient passivation on the metal parts. Made in Italy by Facot.

Quantity
In Stock

100% secure payments
  Security policy

(edit with the Customer Reassurance module)

  Delivery policy

(edit with the Customer Reassurance module)

  Return policy

(edit with the Customer Reassurance module)

Corrosion inhibitor for heating and cooling systems, must be used in case the liquid circulating in the system does not exert a sufficient passivation on the metal parts it is composed of. for example, when the circulating antifreezing product has been too much exploited, inhibitor salts must be restored.

What we like about this Regenerating Antifreeze:

  • Technical support instality on using the product for optimum treatment
  • Product corrosion inhibitor for heating and cooling circuits
  • It is to be used in the case in which the liquid circulating in the system does not exercise a sufficient passivation on the metal parts of which it is composed
  • Add 3 - 4 or 5 % of corrosion inhibitor to glycol. Slightly shake the mixture to homogenize it.
  • Available in tank 5 L (5,2 kg)
  • Technical data sheet available for download here on this page

TECHNICAL DATA:
Composition aqueous solution of a special package of inhibitors and perfectly balanced with special additives for the protection of aluminium, its alloys and of common metals which constitute the heating and refrigeration.

  • Appearance: light turbidity
  • Colour: straw
  • Odor: odorless
  • Relative density at 15 °C: 1,350 ± 0,050 g/cm³
  • pH at 20 °C: 11,0 ± 0,5
  • Vapour pressure at 20 °C: 2700 Pa
  • Solubility in water: complete
  • Boiling point: 100 °C
  • Flash point: not flammable
  • Crystallization point: -8 °C
  • Stability: 12 months

How to use:

Circulate with MGFTools pump in addition to the glycol, to the maximum flow rate, so that the induced turbulence can homogenize the solution obtained.

791028
3 Items

Data sheet

Weight (tool)
5,20 Kg (5 L)
Tool size
180 x 140 x 280 mm
Packaging
In container with threaded plug plastic
Standard equipment
Liquid en bottle
Recommended dilution
From 3% to 5%

Download

Regenerating for antifreeze

Corrosion inhibitor for heating circuits and refrigeration

Download (140.27k)

You might also like